Yokogawa EXA DC402 Dual-Channel Conductivity Analyzer - Manual (Page 51)

IM 12D08E02-01E
5-26 Parameter setting
5-3-7. Communication setup
Code 61 *HOUR The clock/calendar for the logbook is set for current date and time as
reference.
*MINUT
*SECND
*YEAR
*MONTH
*DAY
5-3-8. General
Code 70 *LOAD The load defaults code allows the instrument to be returned to the default set
up with a single operation. This can be useful when wanting to change from
one application to another.
5-3-9. Test and setup mode
Code 80 *TEST Not used
Note: attempting to change data in this service code, or others in the series 80 and above without
the proper instructions and equipment, can result in corruption of the instrument setup, and will
impair the performance of the unit.