Yokogawa JUXTA M Series Digital Limit Alarms MVTK - Manual (Page 24)

3-10
<Toc> <Ind> <3. PC Link Communication >
IM 77J04J11-01E 1st Edition : 2006.08.25-00
BRW Writes data into I relays on a bit-by-bit basis in random order
●
Function
Writes ON/OFF data into the individual I relays specified in random order by the specified
number of bits.
• The number of bits to be written into at a time is 1 to 32.
• For the format of response in the event of failure, see subsection 3.1.2.
• The command shown below includes the checksum function.
When performing communication without checksum, do not include the 2-byte
checksum element in the command.
●
Command/Response (for normal operation)
Number of Bytes 1 2 2 1 3 2 5 1 1 1
Command
element
STX Address
number
(ADR)
CPU
number
01
0 BRW d1 Number
of bits
(n)
I relay
number 1
Comma
or space
Comma
or space
• • • Checksum d2 ETX CR
• • • 1
I relay
number 2
Comma
or space
5 1
dn
1 2
I relay
number n
Comma
or space
5 1
Comma
or space
1 1 1
Number of Bytes 1 2 2 2 2 1 1
Response
element
STX Address
number
(ADR)
CPU
number
01
OK CR Checksum ETX
Write data 0 and 1 indicate OFF and ON respectively.
Command (continued)
dn: write data of the specified number of bits (n=1 to 32)
dn=0 (OFF)
dn=1 (ON)
●
Example:
Setting the four user-defined flags (I0033, I0034, I0035 and I0036) of the M Series with
address number 05 to ON, OFF, OFF and ON respectively.
[Command]
[STX]05010BRW04I0033,1,I0034,0,I0035,0,I0036,17D[ETX][CR]
Note: The user-defined flags are flags that the user can freely read/write.
OK is returned in response to the above command.
[Response]
[STX]0501OK60[ETX][CR]