Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 152)

126 Unified IP MIB Reference
53-1003106-01
Fan status
4
snChasMainBrdId
(continued) Octet 10 to Octet 13 – DRAM size in KBytes (both format version 1 and
2)
Octet 14 to Octet 17 – Boot flash size in KBytes (both format version 1
and 2)
Octet 18 to Octet 21 – Code flash size in KBytes (both format version 1
and 2)
Octet 22 to Octet 27 – Serial number (both format version 1 and 2)
Octet 28 – Chassis backplane type (format version 1 only):
This octet applies only if Octet 0 is equal to 1.
•
chassis4000 – 0x00
•
chassis8000 – 0x04
•
chassis15000 – 0x05
•
Turbo8 – 0x07 (stack2)
•
FastIron2 – 0x06 (stack1)
snChasExpBrdId
brcdIp.1.1.1.1.14
Syntax: OCTET STRING
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER series
devices and on the
FastIron devices.
Read-only It identifies the expansion board; the board that attaches to the main
board. This is an encoded octet string. Each octet provides the
following information:
Octet 0 – Identifies the format of this octet string.
Octet 1 – Expansion board type:
•
HUNDRED_MEG_1PORT – 1
•
HUNDRED_MEG_2PORT – 2
•
HUNDRED_MEG_1PORT_COPPER – 3
•
HUNDRED_MEG_2PORT_COPPER – 4
•
HUNDRED_MEG_2PORT_LX – 5
•
GIGA_1PORT – 8, GIGA_2PORT – 9
Octet 2 – Fiber port type:
•
NONFIBER – 0
•
SX_FIBER – 1
•
LX_FIBER – 2
•
LHX_FIBER – 3
•
LX_SX_FIBER – 4
snChasSpeedLeds
brcdIp.1.1.1.1.15
Syntax: Integer Read-only Applies to devices that have an LED for media speed. This object is
replaced by the object snAgentBrdSpeedLedString.
It is represented by one bit. There can be up to 32 bits per slot. Status
can be one of the following:
•
0 – 10 Mbit
•
1 – 100 Mbit
snChasEnableFanTrap
brcdIp.1.1.1.1.16
Syntax: Integer Read-write For chassis devices only.
Indicates if the SNMP agent process has been enabled to generate fan
failure traps:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snChasIdNumber
brcdIp.1.1.1.1.17
Syntax: DisplayString Read-only Shows the chassis identity number. This is used by inventory control.
This is not the number on the label of the device.
By default, this object displays a null string. This object can have up to
64 characters.
Name, OID, and syntax Access Description