Sntraptmloggingstart, Sntraptmloggingstop, Sntraptmloggingrestart – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual

Page 722: Sntraptmrecoveryslotres et, Sntraptmegressdataerror, Sntrapsfmlinkdown, Sntrapsfmaccesserror, Np buffer error notifications

Advertising
background image

696

Unified IP MIB Reference

53-1003106-01

Proprietary traps

67

NP buffer error notifications

The following table contains Network Processor (NP) buffer error notifications that are supported
only on the Brocade NetIron CES and Brocade NetIron CER series devices.

Trap name and number

Varbinds

Severity

Description and trap message

snTrapTMLoggingStart
brcdIp.0.1015

snAgGblTrapMessage

Informational

Traffic Manager logging started, triggerred
by an event.

snTrapTMLoggingStop
brcdIp.0.1016

snAgGblTrapMessage

Informational

Traffic Manager logging stopped because
the storage is full.

snTrapTMLoggingRestart
brcdIp.0.1017

snAgGblTrapMessage

Informational

Traffic Manager logging restarted after the
log was cleared.

snTrapTMRecoverySlotRes
et
brcdIp.0.1019

snAgGblTrapMessage

Informational

This trap is generated when the Traffic
Manager recovery slot reset is triggered.

snTrapTMEgressDataError
brcdIp.0.1020

snAgGblTrapMessage

Major

This trap is generated when the system
detects egress data errors on the Traffic
Manager.
Sample trap message:
Health Monitoring : TM Egress

data errors detected on LP

<num>/TM <num>

snTrapSFMLinkDown
brcdIp.0.1100

snAgGblTrapMessage

Warning

A link from the LP Traffic Manager to an
SFM Fabric Element is down.
Sample trap message:
Fabric Monitoring Link Down :

SFM <num>/FE <num>/Link <num>,

LP <num>/TM <num>

snTrapSFMLinkUp
brcdIp.0.1101

snAgGblTrapMessage

Informational

A link from the LP Traffic Manager to an
SFM Fabric Element is up.
Sample trap message:
Fabric Monitoring Link Up :

SFM <num>/FE <num>/Link <num>,

LP <num>/TM <num>

snTrapSFMAccessError
brcdIp.0.1102

snAgGblTrapMessage

Major

This trap is generated when the system
fails to access an SFM Fabric Element.
Sample trap message:
Health Monitoring: FE

accessfailure on SFM <num>/FE

<num>

Advertising
This manual is related to the following products: