Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 593)

Unified IP MIB Reference 567
53-1003106-01
PIM-SM
55
PIM RP set table
The PIM RP set table contains information about candidate Rendezvous Points (RPs) for IP
multicast groups. When the local Layer 3 Switch is the BSR, this information is obtained from the
advertisements received from the candidate-RP. When the local Layer 3 Switch is not the BSR, this
information is obtained from the received RP-Set messages.
PIM RP candidate table
The PIM RP candidate table lists the IP multicast groups for which the local router is to advertise
itself as a candidate-RP. If this table is empty, the local router will advertise itself as a candidate-RP
for all groups. The snPimEnable object must be "enabled" before this table is read or written.
snPimCandidateBSRHashMaskLen
brcdIp.1.2.9.2.2.1.3
Syntax: Integer Read-write Indicates the hash mask value for this Layer 3 Switch as a
candidate bootstrap router.
Valid values: 1 – 32
snPimCandidateBSRPreference
brcdIp.1.2.9.2.2.1.4
Syntax: Integer Read-write Indicates the preference value for this Layer 3 Switch as a
candidate bootstrap router.
Valid values: 0 – 255
Default: 100
Name, OID, and syntax Access Description
snPimRPSetTable
brcdIp.1.2.9.2.3 None The PIM RP set table.
snPimRPSetGroupAddress
brcdIp.1.2.9.2.3.1.1
Syntax: IpAddress Read-only Shows the IP multicast group address. This object plus
snPimRPSetMask forms the group prefix for the
Ccandidate-RP.
snPimRPSetMask
brcdIp.1.2.9.2.3.1.2
Syntax: IpAddress Read-only Shows the IP multicast group address mask. This object
plus snPimRPSetGroupAddress forms the group prefix for
the candidate-RP.
snPimRPSetIPAddress
brcdIp.1.2.9.2.3.1.3
Syntax: IpAddress Read-only Shows the IP address of the candidate-RP.
snPimRPSetHoldTime
brcdIp.1.2.9.2.3.1.4
Syntax: Integer Read-only Shows the holdtime, in seconds, of a candidate-RP. If the
local router is not the BSR, this value is 0.
Valid values: 0 - 255
Name, OID, and syntax Access Description
snPimCandidateRPTable
brcdIp.1.2.9.2.4 None The PIM RP candidate table.
snPimCandidateRPGroupAddress
brcdIp.1.2.9.2.4.1.1
Syntax: IpAddress Read-only Shows the IP multicast group address mask. This object
combined with snPimCandidateRPMask forms the group
prefix for which the local router will advertise itself as a
candidate-RP.
Name, OID, and syntax Access Description