Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 232)

206 Unified IP MIB Reference
53-1003106-01
Switch port information
8
snSwIfStatsLinkChange
brcdIp.1.1.3.3.5.1.45
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the total number of link state changes on the interface.
snSwIfInOctets
brcdIp.1.1.3.3.5.1.46
Syntax: Counter64
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the total number of octets received on the interface, including
framing characters. This object is a 64-bit counter of the ifInOctets object
defined in RFC 1213. The octet string is in big-endian byte order.
This object has eight octets.
snSwIfOutOctets
brcdIp.1.1.3.3.5.1.47
Syntax: Counter64
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit counter of the
ifOutOctets object, defined in RFC 1213. The octet string is in big-endian
byte order.
This object has eight octets.
snSwIfStatsInBitsPerSec
brcdIp.1.1.3.3.5.1.48
Syntax: Gauge32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of bits per second received on the interface over a
five-minute interval.
Name, OID, and syntax Access Description