Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 446)

420 Unified IP MIB Reference
53-1003106-01
VRRP interface table
42
VRRP interface table
The objects in the following table apply to VRRP, VRRP-E, and VSRP, depending on which protocol is
enabled in the device. This table has been replaced by the
“snVrrpIf2Table” table, which is
presented in “VRRP and VRRP-E interface table” .
snVrrpIfMaxNumVridPerSystem
brcdIp.1.2.12.1.4
Syntax: Integer Read-only Indicates the maximum number of VRID per system.
snVrrpClearVrrpStat
brcdIp.1.2.12.1.5
Syntax: Integer Read-write Clear VRRP statistics command.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snVrrpIfTable
brcdIp.1.2.12.2.1 None The VRRP interface table.
snVrrpIfPort
brcdIp.1.2.12.2.1.1.1
Syntax: Integer Read-only Shows the IP port of this VRRP interface.
snVrrpIfAuthType
brcdIp.1.2.12.2.1.1.2
Syntax: Integer Read-write Indicates the authentication type of this interface:
•
noAuth(0)
•
simpleTextPasswd(1)
•
ipAuthHeader(2)
snVrrpIfAuthPassword
brcdIp.1.2.12.2.1.1.3
Syntax: OCTET STRING
NOTE: This object is not
supported on
the Brocade
FastIron devices.
Read-write Shows the simple text password for this interface. You can use a simple
text password if the
“snVrrpIfAuthType” object is set to
simpleTextPasswd(1).
snVrrpIfRxHeaderErrCnt
s
brcdIp.1.2.12.2.1.1.4
Syntax: Counter32 Read-only Shows the number of VRRP or VRRP-E packets received by the interface
that had a header error.
snVrrpIfRxAuthTypeErrC
nts
brcdIp.1.2.12.2.1.1.5
Syntax: Counter32 Read-only Shows the number of VRRP or VRRP-E packets received by the interface
that had an authentication error.
snVrrpIfRxAuthPwdMism
atchErrCnts
brcdIp.1.2.12.2.1.1.6
Syntax: Counter32 Read-only Shows the number of VRRP or VRRP-E packets received by the interface
that had a password value that does not match the password used by
the interface for authentication.
snVrrpIfRxVridErrCnts
brcdIp.1.2.12.2.1.1.7
Syntax: Counter32 Read-only Shows the number of VRRP or VRRP-E packets received by the interface
that contained a VRID that is not configured on this interface.