Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 527)

Unified IP MIB Reference 501
53-1003106-01
BGP4 router operational status table
49
BGP4 router operational status table
The following table lists the BGP4 router operational status table MIB objects.
snBgp4NeighOperStatusNotifTxCou
nts
brcdIp.1.2.11.15.1.1.13
Syntax: Counter32 Read-only Shows the number of notification messages sent.
snBgp4NeighOperStatusNotifRxCo
unts
brcdIp.1.2.11.15.1.1.14
Syntax: Counter32 Read-only Shows the number of notification messages received.
snBgp4NeighOperStatusOpenTxCo
unts
brcdIp.1.2.11.15.1.1.15
Syntax: Counter32 Read-only Shows the number of open messages sent.
snBgp4NeighOperStatusOpenRxCo
unts
brcdIp.1.2.11.15.1.1.16
Syntax: Counter32 Read-only Shows the number of open messages received.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4RouteOperStatusTable
brcdIp.1.2.11.16.1 None The BGP4 router operational status table.
snBgp4RouteOperStatusIndex
brcdIp.1.2.11.16.1.1.1
Syntax: Integer32 Read-only The index for a route entry.
snBgp4RouteOperStatusIp
brcdIp.1.2.11.16.1.1.2
Syntax: IpAddress Read-only Shows the IP address of the route.
snBgp4RouteOperStatusSubnetM
ask
brcdIp.1.2.11.16.1.1.3
Syntax: IpAddress Read-only Shows the IP subnet mask of the route.
snBgp4RouteOperStatusNextHop
brcdIp.1.2.11.16.1.1.4
Syntax: IpAddress Read-only Shows the IP address of the next hop in the route.
snBgp4RouteOperStatusMetric
brcdIp.1.2.11.16.1.1.5
Syntax: Integer Read-only Shows the value of the route’s MED attribute.
snBgp4RouteOperStatusLocalPref
erence
brcdIp.1.2.11.16.1.1.6
Syntax: Integer32 Read-only Shows the degree of preference for this route relative to
other routes in the local AS. When the BGP4 algorithm
compares routes on the basis of local preferences, the route
with the higher local preference is chosen. The preference
can have a value from 0 through 4294967295.