Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 79)

Unified IP MIB Reference 53
53-1003106-01
draft-ietf-idr-bgp4-mibv2-12 MIB
2
draft-ietf-idr-bgp4-mibv2-12 MIB
The following section of draft-ietf-idr-bgp4-mibv2-12 defines MIB objects for managing the Border
Gateway Protocol, version 4.
BGP4v2 per-peer session management information
The following table displays information about the BGP4v2 per-peer session management
information group. Use the show ip bgp neighbor id command to display the BGP4v2 per-peer
session management information.
NOTE
The following table is not supported on the Brocade NetIron CES 2000 series BASE Packages device.
bgp4PathAttrNextHop 1.3.6.1.2.1.15.6.1.6 -
bgp4PathAttrMultiExitDisc 1.3.6.1.2.1.15.6.1.7 -
bgp4PathAttrLocalPref 1.3.6.1.2.1.15.6.1.8 -
bgp4PathAttrAtomicAggregate 1.3.6.1.2.1.15.6.1.9 -
bgp4PathAttrAggregatorAS 1.3.6.1.2.1.15.6.1.10 -
bgp4PathAttrAggregatorAddr 1.3.6.1.2.1.15.6.1.11 -
bgp4PathAttrCalcLocalPref 1.3.6.1.2.1.15.6.1.12 -
bgp4PathAttrBest 1.3.6.1.2.1.15.6.1.13 -
bgp4PathAttrUnknown 1.3.6.1.2.1.15.6.1.14 -
bgp4PathAttrTable 1.3.6.1.2.1.15.6 This table is supported on the Brocade
MLXe and NetIron devices.
bgp4PathAttrASPathSegment 1.3.6.1.2.1.15.6.1.5 This object is the sequence of AS path
segments. Each AS path segment is
represented by a triplet of type, length,
and value.
The Brocade NetIron XMR, Brocade
NetIron MLX, Brocade MLXe, Brocade
NetIron CES, and Brocade NetIron CER
series devices return “AS_TRANS” if the
AS number is greater than 2 bytes.
bgp4PathAttrAggregatorAS 1.3.6.1.2.1.15.6.1.10 The AS number of the last BGP4 speaker
that performed route aggregation. A value
of zero (0) indicates the absence of this
attribute.
The Brocade NetIron XMR, Brocade
NetIron MLX, Brocade MLXe, Brocade
NetIron CES, and Brocade NetIron CER
series devices return “AS_TRANS
(23456)” for this object if remote AS is
greater than 16 bits.
Object group name Object identifier Notes