Pwlocalstatus, Pwremotestatusc apable, Pwremotestatus – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual

Page 616: Pwtimeelapsed, Pwvalidintervals, Pwrowstatus, Pwstoragetype, Pwoamenable, Draft-ietf-pwe3-pw-mib-11.txt, Pwindex

Advertising
background image

590

Unified IP MIB Reference

53-1003106-01

Pseudo wire MIB

60

Draft-ietf-pwe3-pw-mib-11.txt

The following pseudo Wire (PW) MIB objects, as defined in draft-ietf-pwe3-pw-mib-11.txt, are
supported on the Brocade MLXe and Brocade NetIron series devices.

Draft-ietf-pwe3-pw-mib-11.txt obsoletes draft-ietf-pwe3-pw-mib-06.txt; however, some objects in
draft-ietf-pwe3-pw-mib-06.txt are still supported on the NetIron series devices. (Refer to

“Supported objects in draft-ietf-pwe3-pw-mib-06.txt”

on page 592

Support for draft-ietf-pwe3-pw-mib-11.txt has been extended to VLL, VLL-local, and VPLS on the
Brocade MLXe and Brocade NetIron series devices. For additional objects, refer to

“VLL endpoint

table”

on page 607, and

“VPLS instance table”

on page 609.

NOTE

Support for the following objects in draft-ietf-pwe3-pw-mib-11.txt provides read-only access.

pwLocalStatus

brcdIp.3.1.2.1.2.1.39

If tunnel is down,
returns 0x80,
otherwise returns
0x00

Supported

If tunnel is down, returns
0x80, otherwise returns
0x00

pwRemoteStatusC
apable

brcdIp.3.1.2.1.2.1.40

notApplicable(1)

notApplicable(
1)

notApplicable(1)

pwRemoteStatus

brcdIp.3.1.2.1.2.1.41

Always null

Always null

Always null

pwTimeElapsed

brcdIp.3.1.2.1.2.1.42

Always 0

Always 0

Always 0

pwValidIntervals

brcdIp.3.1.2.1.2.1.43

Always 0

Always 0

Always 0

pwRowStatus

brcdIp.3.1.2.1.2.1.44

active(1)

active(1)

active(1)

pwStorageType

brcdIp.3.1.2.1.2.1.45

permanent(4)

permanent(4)

permanent(4)

pwOamEnable

brcdIp.3.1.2.1.2.1.46

false(2)

false(2)

false(2)

Object

Object identifier

Support for VLL

Support for VLL-local

Support for VPLS

pwindex

brcdIp.3.1.2.1.2.1.
1

VLL-specific
encoding. One row
per VLL instance.

VLL-local-specific
encoding. Two rows
per VLL-local instance,
one for each E.
Ethernet endpoint for
each instance.

VPLS-specific
encoding. One row
per VPLS instance
and peer
combination.

pwEnetPwInstance

brcdIp.3.1.4.1.1.1.
1

Always 1

1 for first endpoint, 2
for second

Always 1

pwEnetPwVlan

brcdIp.3.1.4.1.1.1.
2

VLAN ID

4097 for
pseudo wire in
raw mode

Default VLAN ID
for PW
untagged
frames

Always 4096 for raw
mode

VPLS works in raw
mode.
Always 4096 in raw
mode. There is no
VLAN tagging in
outgoing packets.

TABLE 6

Support for the pwTable

Object

Object identifier

Support for VLL

Support for
VLL-local

Support for VPLS

Advertising
This manual is related to the following products: