Snswportentrysize, Snfdbstationentrysize, Snportstpentrysize – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 215: Snswenablebridgenewroot trap, Snswenablebridgetopocha ngetrap, Snswenablelockedaddrviol ationtrap
Unified IP MIB Reference
189
53-1003106-01
Switch group configuration
7
snSwPortEntrySize
brcdIp.1.1.3.1.22
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only
Specifies the size of each port table entry.
snFdbStationEntrySize
brcdIp.1.1.3.1.23
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only
Specifies the size of each FDB station table entry.
snPortStpEntrySize
brcdIp.1.1.3.1.24
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only
Specifies the size of each port STP table entry.
snSwEnableBridgeNewRoot
Trap
brcdIp.1.1.3.1.25
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
bridge new root traps.
snSwEnableBridgeTopoCha
ngeTrap
brcdIp.1.1.3.1.26
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
bridge topology change traps.
snSwEnableLockedAddrViol
ationTrap
brcdIp.1.1.3.1.27
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
locked address violation traps.
Name, OID, and syntax
Access
Description