Sntrapifindexassignmentc hanged, Sntrapmodulestatuschang e, Sntrapl2caccesslog – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 754: Sntrapdot1agcfmremote mepup

728
Unified IP MIB Reference
53-1003106-01
General traps for the Brocade NetIron devices
67
Trap name and number
Varbinds
Severity
Description and trap message
snTrapIfIndexAssignmentC
hanged
brcdIp.0.172
snAgGblTrapMessage
Informational The SNMP trap is generated when the
interface index (ifIndex) assignment for a
physical interface is changed.
Sample trap message:
System: IfIndex assignment was
changed
snTrapModuleStatusChang
e
brcdIp.0.176
snChasUnitIndex,
snAgentBrdIndex,
snAgentBrdModuleSt
atus, and
snAgGblTrapMessage
Notification
The operational state of a module is
changed. The management entity receiving
the notification can identify the module and
the event by referencing snChasUnitIndex,
snAgentBrdIndex, and
snAgentBrdModuleStatus.
If the module is down, the
snAgGblTrapMessage varbind contains a
text string that describes the cause.
If the module is up, nothing is displayed for
snAgGblTrapMessage.
Sample trap message:
For module up: System: Module up in
slot <slot-number>
For module down: System: Module
down in slot <slot-number>,
reason <reason. Error Code
<error-code>
For standby MP up: System: Standby
Management Module was ready
For standby MP down: System: Standby
Management Module was down,
reason <reason>. Error Code
<error-code>
snTrapl2CAccessLog
brcdIp.0.184
snAgGblTrapMessage
Notification
This trap is generated to provide information
about the state of the I2C access of the
management module.
Sample trap message:
last good i2c access, Mux index
0, Mux tap 0, ID 0x9, Addr 0x1,
(SNM2TEMP)
bad i2c access (GIEI = set),
Severity Minor, Mux index 0,
Mux tap2, ID 0x9, Addr 0x1,
(SNM3TEMP)
snTrapDot1agCfmRemote
MEPAgeOut
brcdIp.0.192
dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage
Warning
This trap is generated when the 802.1ag
Remote MEP ages out.
Sample trap message:
System: Remote MEP 2 in Domain
maint_domain, MA maint_asso
aged out
snTrapDot1agCfmRemote
MEPUp
brcdIp.0.193
dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage
Informational This trap is generated when the 802.1ag
Remote MEP is up.
Sample trap message:
System: Remote MEP 2 in Domain
maint_domain, MA maint_asso
become UP state