Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 618)

592 Unified IP MIB Reference
53-1003106-01
Pseudo wire MIB
60
The following table shows how the value of pwEnetVlanMode for VLL services is determined.
The following table shows how the value of pwEnetPortVlan for VLL services is determined.
Supported objects in draft-ietf-pwe3-pw-mib-06.txt
The following pseudo Wire (PW) MIB objects are the only objects in draft-ietf-pwe3-pw-mib-06.txt
that are supported on the Brocade NetIron MLX, Brocade MLXe, and Brocade NetIron XMR devices.
They are used to support draft-ietf-pwe3-pw-mib-11.txt. Read-only access is available for
draft-ietf-pwe3-pw-mib-o6.txt.
Pseudo Wire tag mode is End Point tag mode is Value of pwEnetPwVlan is
raw (untagged) untagged 4097
raw (untagged) tagged 4097
tagged untagged Default VLAN ID
tagged tagged VLAN ID of endpoint
Pseudo Wire tag mode is End Point tag mode is Value of pwEnetVlanMode is
raw (untagged) untagged portBased(1) - No VLAN tag
raw (untagged) tagged removeVlan(5)
tagged untagged addVlan(4)
tagged tagged noChange(2)
Pseudo Wire tag mode is End Point tag mode is Value of pwEnetPortVlan is
raw (untagged) untagged 4096
raw (untagged) tagged VLAN ID of endpoint VLAN
tagged untagged 4096
tagged tagged VLAN ID of endpoint VLAN