Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 44)

18 Unified IP MIB Reference
53-1003106-01
RFC 2863: The Interfaces Group MIB
2
Event group
On the NetIron devices, the following objects in the Event group control the generation and
notification of events from the devices. Each entry in the eventTable describes the parameters of
the event that can be triggered:
• eventIndex
• eventDescription
• eventType
• eventCommunity
• eventLastTimeSent
• eventOwner
• eventStatus
Log group
On the Brocade FastIron devices, the following objects in the Log group lists the list of events that
have been logged from the devices.
• logEventIndex
• logIndex
• logTime
• logDescription
RFC 2863: The Interfaces Group MIB
RFC 2863 is supported on the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron CES, Brocade NetIron CER series, Brocade FastIron SX, Brocade FESX6, Brocade
FCX, and Brocade ICX series devices.
ifIndex
On the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe, Brocade NetIron CES, and
Brocade NetIron CER series devices, there can be 20, 40, 48, or 64 ifIndexes per module. The
default is 20. Execute the snmp-server max-ifindex-per-module 40 command to change the ifIndex
to 40 (for example, for backward-compatibility).
On the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe, Brocade NetIron CES, and
Brocade NetIron CER series devices, every trunk group will appear as a row within the ifTable and
ifXTable. The ifIndex range involves all the physical ports, virtual ports, loopback ports, multicast
tunnels, GRE tunnels, MPLS tunnels, and Trunks in that order.
Use the Get operations on snInterfaceLookupIfIndex (indexed by ifIndex) to get InterfaceId (in a
simple OID form).
Table 2 details the XMR or MLX index ranges and they are subject to change from one release to
the next.