Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 411)

Unified IP MIB Reference 385
53-1003106-01
Traffic Manager VOQ statistics table
39
Traffic Manager VOQ statistics table
The brcdTMDestUcastQStatTable contains information of the unicast queue counters aggregated
across all the Traffic Managers (TMs) per destination interface. The following MIB objects are
supported on the Brocade NetIron XMR and Brocade MLX Series devices and the table is not
supported on the Brocade NetIron CES and Brocade NetIron CER series devices.
By default, the SNMP support for brcdTMDestUcastQStatTable is disabled. Use tm-voq-collection
[interval seconds] command to enable Traffic Manager Virtual Output Queue (VOQ) statistics and
snmp-server enable mib tm-dest-qstat command to enable the SNMP support.
Use clear tm-voq-stats dst_port [ ethernet | all ] slot/port command to clear all the CLI and SNMP
statistics counters for the Traffic Manager VOQ statistics.
brcdTMStatsIngressDequeueBytes
brcdIp.1.14.2.1.2.2.1.10
Syntax: Counter64 Read-only Shows the count of all bytes dequeued from ingress
queues and forwarded to the Traffic Manager.
NOTE: This object is not supported on the
NI-MLX-10Gx8-D 8-port 10GbE (D) module,
NI-MLX-10Gx8-M 8-port 10GbE (M) module,
and BR-MLX-100Gx2 cards. Zero is returned for
these cards.
brcdTMStatsIngressTotalQDiscardPkts
brcdIp.1.14.2.1.2.2.1.11
Syntax: Counter64 Read-only Shows the count of all packets failing to enter ingress
queues on the Traffic Manager. This may be due to the
following reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMStatsIngressTotalQDiscardBytes
brcdIp.1.14.2.1.2.2.1.12
Syntax: Counter64 Read-only Shows the count of all bytes failing to enter ingress
queues on the Traffic Manager. This may be due to the
following reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMStatsIngressOldestDiscardPkts
brcdIp.1.14.2.1.2.2.1.13
Syntax: Counter64 Read-only Shows the count of all packets entering ingress
queues on the Traffic Manager, but deleted later due to
the buffer being full.
brcdTMStatsIngressOldestDiscardBytes
brcdIp.1.14.2.1.2.2.1.14
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues
on the Traffic Manager, but deleted later due to the
buffer being full.
brcdTMStatsEgressDiscardPkts
brcdIp.1.14.2.1.2.2.1.15
Syntax: Counter64 Read-only Shows the count of all packets failing to enter egress
queues on the Traffic Manager.
brcdTMStatsEgressDiscardBytes
brcdIp.1.14.2.1.2.2.1.16
Syntax: Counter64 Read-only Shows the count of all bytes failing to enter egress
queues on the Traffic Manager.
Name, OID, and syntax Access Description