Install spray line support brackets, Front view – Hired-Hand Mega-Cool rev 4-08 User Manual
Page 18
Advertising
![background image](/manuals/362845/18/background.png)
Part No. 4801-5093 Rev 4-08
Unitized System
Page 18
Install Spray Line Support Brackets
1. Make sure BackPlate is at proper framing height.
2. Attach spray line support brackets with #8 x ½” TEK screws at the pre-drilled hole positions as
shown in diagram above.
Side View
Front View
BackPlate
Spray line support
bracket
Locate and attach top support brackets
at pre-drilled hole positions
of back plate.
“A
”
#8 x ½”
Advertising
This manual is related to the following products: