Top view, Install spray line – Hired-Hand Mega-Cool rev 4-08 User Manual
Page 19
Advertising
Part No. 4801-5093 Rev 4-08
Unitized System
Page 19
Install Spray Line
1. Glue spray line sections together. Important! Glue joints with spray
line holes pointed in the same direction. Allow glue to dry.
2. Insert spray line assembly into one end of top bracket. Slide
assembly until spray line spans entire length of top bracket.
3. Rotate spray line to place holes facing upward. (NOTE: Side View
shown at 1
Rotate spray line
to point holes upward.
Assemble Spray
i
Lay Spray Line Into Top Support Brackets
Spray Line Installed With Holes Upward
Top Support
Bracket
TOP VIEW
TOP VIEW
1
2
3
Be sure to point holes in the same
direction when gluing Spray line.
Advertising
This manual is related to the following products: