Hired-Hand Mega-Cool rev 4-08 - Manual (Page 35)

Part No. 4801-5093 Rev 4-08 Unitized System Page 35
Center Tracks
1. Move to the next joint where the edges of two back plates abut, and install a center track.
Align the two topmost holes of the center track with the second holes from the top of the
back plates as shown in the diagram above.
2.
Install sheet metal screws through holes to fasten center track.
3.
Fasten bottom of center track to bottom cover with sheet metal screws.
4.
Install all center tracks by repeating steps 1-3.
Center Track