Hired-Hand Mega-Cool rev 4-08 - Manual (Page 41)

Part No. 4801-5093 Rev 4-08 Unitized System Page 41
Tubular Motor Mount Attachment
1. Attach the motor mount to either the left track or the right track depending on
which end of the system the motor is to be located. Install four bolts and nuts
through the holes of the motor mount and through the respective holes of the
guide bracket.
2.
Tighten bolts and nuts securely.
Motor mount
On end where motor
will be located, attach
the motor mount to
the guide bracket. NOTE: Attach bearing mount to
opposite end of assembly using
same procedure.