Hired-Hand Mega-Cool rev 4-08 - Manual (Page 48)

Part No. 4801-5093 Rev 4-08 Unitized System Page 48
Lock Motor
Limit Switch
Motor
Bracket
Drive Shaft
Assembly
For Mounting Lock Motor on End of System
1. On the right hand end of the system, position left hand side of Mounting Bracket 9 3/4" minimum from Back Plate to
account for Cover Splice on end of system.
2. On the left hand end of the system, position right hand side of motor 9 3/4" minimum from Back Plate to account for Cover
Splice on end of system.
Minimum
Distance to
Mounting
Bracket
9 3/4”
(24.76cm)