Hired-Hand Mega-Cool rev 4-08 - Manual (Page 42)

Part No. 4801-5093 Rev 4-08 Unitized System Page 42
Attachment Of Tubular Motor To Motor Mount
1. Lift end of drive pipe containing motor. Press motor into bracket that is installed on the
motor mount.
2.
Be sure that the limit switches are accessible.
Mot or Cable Posit ioning
Depending on t he applicat ion, t he mot or
cable can pass t hrough t he cent er of side
of t he mot or head. Raise yellow cover
plat e, reposit ion t he cable, and t hen press
cover plat e int o posit ion.
Mount ing The Mot orized Tube
The mot or bracket s are equipped wit h a clip
ring. This clip ring does not have t o be
removed for inst allat ion. You can press t he
mot or axially int o t he mot or bracket in any of
six posit ions, so t hat t he limit swit ch adjust ment
but t ons are always easily accessible.