Hired-Hand Mega-Cool rev 4-08 - Manual (Page 22)

Part No. 4801-5093 Rev 4-08 Unitized System Page 22
4 ft. Pads
5 ft. Pads
6 ft. Pads
2 meter Pads
Top Section
Top Section
Bottom Section
Bottom Section
NOTE: Illustration
shows lineup for 5
ft. Pads.
¼-20x1/2"
Stainless
Steel Bolts
¼-20
Stainless
Steel Nuts
¼-20
Stainless
Steel Nuts
6” PAD ONLY:
Assemble Left Hand and Right Hand Top and
Bottom System End Cap Sections together
using ¼-20x1/2" stainless steel bolts and ¼-20
stainless steel nuts provided as shown above to
the desired height.
NOTE: Top Section without bottom section
used for 3 ft. high pads.
System End Cap assembly:
Top holes in top section adjust height for 4 ft.
pads.
Second set of holes from the 4 ft. holes adjust
height for 5 ft. pads.
Third set of holes from the 4 ft. holes adjust
height for 6 ft. pads.
Bottom set of holes adjust height for 2 meter
pads.
Assemble End Caps
Assemble Top Section to
Inside of System End
Right End Cap
Left End Cap