Spectra Precision ProMark 800 Reference Manual User Manual
Page 196
184
Set Command Library
Parameters
Example
Setting rover dynamics to “Walking”:
$PASHS,DYN,3*39
Comments
In the adaptive mode (8), the receiver analyzes its own
motion and automatically chooses one of the dynamic models
that is the most suitable. The possible dynamic models are
those corresponding to the other choices in the command
(i.e. 2 to 7, but not 1 or 9). Using the adaptive mode rejects
the possible use of the user-defined dynamic model.
Relevant Query
Command
$PASHQ,DYN
See Also
$PASHS,UDP
ELM: Setting the Elevation Mask for Raw Data Output
Function
This command is used to set the minimum satellite elevation
for raw data recording, raw data and differential data output.
Command Format
Syntax
$PASHS,ELM,d1[*cc]
Parameter
Description
Range
Default
d1
Receiver dynamics:
• 1: Static
• 2: Quasi-static
• 3: Walking
• 4: Ship
• 5: Automobile
• 6: Aircraft
• 7: Unlimited
• 8: Adaptive
• 9: User-defined (see
also $PASHS,UDP)
1-9
8
*cc
Optional checksum
*00-*FF