Sat: satellites status, See also, Function – Spectra Precision ProMark 800 Reference Manual User Manual
Page 375: Command format, Response format

363
Query Command Library
Example
$PASHQ,RWO,A
$PASHR,RWO,A,9,001.00,11,MPC,0.00,B,DPC,0.00,B,PBN,0.00,B,SNV,0.00
,B,SNG,0.00,B,SNW,0.00,B,SAL,0.00,B,SAG,0.00,B,SAW,0.00,B,ION,0.00,B,
SBD,0.00,B *6D
See also
$PASHQ,RAW
SAT: Satellites Status
Function
This command allows you to read the status of the different
satellite constellations used.
Command Format
Syntax
$PASHQ,SAT[*cc]
Response Format
Syntax
$PASHR,SAT,d1,n(d2,d3,d4,f5,c6)*cc
Parameters
The GPS PRN number is d2.
The EGNOS PRN number is d2 plus 87.
The GLONASS slot number is d2 minus 64.
4
4800
9
115200
Code
Baud Rate
Code
Baud Rate
Parameter
Description
Range
d1
Number of satellites locked
d2
SV PRN number
1-32: GPS
33-64: SBAS
65-96: GLONASS
97-126: GALILEO
127-128: GIOVE A/B
193-197: QZSS
d3
SV azimuth, in degrees
0-359
d4
SV elevation angle, in degrees
0-90
f5
SV signal-noise ratio, in dB.Hz
30.0-60.0
c6
SV used in computation or not
• U: SV used
• -: SV not used
*cc
Checksum
*00-*FF