Spectra Precision ProMark 800 Reference Manual - Manual (Page 216)

204
Set Command Library
NPT: Tagging SBAS Differential Positions in NMEA & NMEA-Like
Messages
Function This command allows you to define the code the receiver will
insert in each of its NMEA-like or NMEA messages to tell that
the position solution inserted in the message is of the SBAS
Differential type.
Command Format Syntax
$PASHS,NPT,d1,d2[*cc]
Parameters
Example
Tagging SBAS Differential position solutions in NMEA-like
and NMEA messages with code “9”:
$PASHS,NPT,1,1*3F
Relevant Query
Commands
$PASHQ,NPT
$PASHQ,PAR
NTR,LOD: Loading the NTRIP Caster Source Table
Function This command is used to load the source table from the
NTRIP caster.
Parameter Description Range Default
d1
Code assigned to SBAS differential position
solution in NMEA-like messages (CRT, DCR,
DPO, POS, VEC):
• 0: Code “1”
• 1: Code “9”
0,1 0
d2
Code assigned to SBAS differential position
solution in NMEA messages (GGA):
• 0: Code “2”
• 1: Code “9”
0, 1 0
*cc Optional checksum *00-*FF