Function, Command format, Relevant query command – Spectra Precision ProMark 800 Reference Manual User Manual
Page 215: See also
203
Set Command Library
Parameters
Example
Disabling all NMEA and NMEA-like messages on port A:
$PASHS,NME,ALL,A,OFF*50
NME,PER: Setting Unique Output Rate for all NMEA Messages
Function
This command is used to set the same output rate for all
NMEA and NMEA-like messages. This command will
overwrite all the output rates set individually for each
message type using $PASHS,NME,xxx.
Command Format
Syntax
$PASHS,NME,PER,f[*cc]
Parameters
Example
Setting the output rate to 1 second:
$PASHS,NME,PER,1*45
Relevant Query
Command
$PASHQ,NMO
See also
$PASHS,NME
$PASHS,POP
Parameter
Description
Range
c1
Port ID
A: Serial portC: Bluetooth port
E: Modem
M, U: Memory
A, C, E, M, U
*cc
Optional checksum
*00-*FF
Parameter
Description
Range
Default
f
Output rate.
Setting $PASHS,POP to “20”
is a prior condition to operat-
ing at 0.05 s (20 Hz).
0.05 s or 0.1-0.4 s with
[F] option activated.
0.5-0.9 s
1-999 s
1 s
*cc
Optional checksum
*00-*FF