Spectra Precision ProMark 800 Reference Manual User Manual
Page 323
Advertising
311
Query Command Library
$GNGSA,A,3,81,83,68,,,,,,,,,,1.6,0.9,1.3*2C
See also
$PASHS,NME
Automatic Output
of GSA Messages
This is a reminder on how to output GSA messages at regular
intervals of time: Use the $PASHS,NME command with the
syntax below:
$PASHS,NME,GSA,<port_ID>,ON,<Rate>
For more details on the $PASHS,NME command, refer to the
Set Command Library Chapter.
As an example, the command below will output GSA
messages on port A at a rate of 0.5 second:
$PASHS,NME,GSA,A,ON,0.5
Advertising