Mdp: port a setting, Example, See also – Spectra Precision ProMark 800 Reference Manual User Manual
Page 334: Function, Command format, Response format, Relevant set command
322
Query Command Library
Parameters
Example
$PASHQ,MDM,STS
$PASHR,MDM,STS,INIT,"Orange F",2G,60*77
See Also
$PASHQ,MDM
MDP: Port A Setting
Function
This command is used to read the current setting of port A.
Command Format
Syntax
$PASHQ,MDP[*cc]
Response Format
Syntax
$PASHR,MDP,A,s*cc
Parameters
Example
$PASHQ,MDP
$PASHR,MDP,A,RS232*5E
Relevant Set
Command
$PASHS,MDP
Parameter
Description
Range
s1
Modem status.
“NONE” means that the [Z] option
(MODEM) is not valid.
OFF, ON, INIT, DIALING,
ONLINE, NONE
s2
Name of the network currently used -
s3
Network type currently used (2G or
3G)
2G, 3G
d4
Signal level.
“-1” means the indication of signal
level is not available.
-1; 0-100
*cc
Optional checksum
*00-*FF
Parameter
Description
Range
s
Current port setting (RS232 or RS422)
232, 422
*cc
Checksum
*00-*FF