Sga: galileo satellites status, Relevant set command, Function – Spectra Precision ProMark 800 Reference Manual User Manual
Page 377: Command format, Response format
365
Query Command Library
Parameters
Example
$PASHQ,SBA
$PASHR,SBA,ON*09
Relevant Set
Command
$PASHS,SBA
SGA: GALILEO Satellites Status
Function
This command is used to read the status of each GALILEO
satellite received.
Command Format
Syntax
$PASHQ,SGA[*cc]
Response Format
Syntax
$PASHR,SGA,d1,n(d2,d3,d4,f5,,f7,d8,d9)*cc
Parameters
Fields f5 and f7 are empty is the corresponding signal is not
tracked.
Parameter
Description
Range
s
ON: SBAS satellites are being tracked and used
OFF: SBAS satellites not tracked
ON, OFF
*cc
Checksum
*00-*FF
Parameter
Description
Range
d1
Number of satellites locked
1-27
d2
SV PRN number (96+satellite slot number)
97-126
127-128: GIOVE-
A/B
d3
SV azimuth in degrees
0-359
d4
SV elevation angle in degrees
0-90
f5
SV E1 signal/noise in dB.Hz
30.0-60.0
f6
Not used
-
f7
SV E5a signal/noise in dB.Hz
30.0-60.0
d8
Satellite usage status (see table below)
0-31
d9
Satellite correcting status (see table below)
0-15
*cc
Checksum
*00-*FF