Star Water Systems SJ10 - Manual (Page 14)

14
95 North Oak Street • Kendallville, IN 46755 • © 2014 Star Water Systems. All rights reserved.
3. attach a 1 in. pipe (not included) to the elbow
and a 1 in. x 3/4 in. reducer bushing (not
included) to the pipe.
4. attach a 3/4 in. pipe (not included) to the
reducer bushing. Install an optional 3/4
in. union (not included) and continue with
pipe and 3/4 in. x 3/4 in. x 3/4 in. tee (not
included).
Glue
1 in. x
3/4 in.
Reducer
Bushing
1 in. Pipe
IL1368
Glue
Tee
Union
3/4 in. pipe
Reducer
bushing
3
4
5
IL1366
Glue
Elbow
2. attach a 1 in. elbow (not included) to the pipe.
2
3
IL1365 Glue
Adapter
Pipe
1. Most pressure tanks will have a 1 in. inlet
elbow on the bottom. Connect to this elbow
with a 1 in. MPT x 1 in. slip (glue) adapter and
short piece of pipe.
1
TANk TO HOUSe CONNeCTiON