Star Water Systems SJ10 - Manual (Page 9)

9
95 North Oak Street • Kendallville, IN 46755 • © 2014 Star Water Systems. All rights reserved.
Well TO pUMp CONNeCTiON (SUCTiON pipe)
7b
IL1538
7b. Tighten bolts (aa) securely.
NOTE: The 1-1/4 in. opening in back of ejector
goes on top of pump and the 1 in. opening goes
on the bottom.
1 in. Male
PVC adapter
8. wrap thread tape around the threads of a 1 in.
male PVC adapter (not included). Thread the
adapter into the front of ejector.
9
IL1540
1 in. PVC Pipe
1 in. Male PVC
Adapter
Well
9. Using 2-step PVC system, attach 1 in. PVC
pipe and couplings (not included) as needed to
connect the 1 in. male PVC adapter to the 1 in.
PVC elbow attached to the top of the well pipe
in Step 5.
NOTE: Be sure the pipe slopes downward slightly
from pump to the well to prevent air pockets.
Proceed to pUMp TO TANk CONNeCTiON
8