Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 103)

t
riton
D
iAgnoSticS
99
r
emoVe
U
Ser
A
cceSS
i
nStrUctionS
:
1. From the D
iAgnoSticS
screen, select the P
ASSworD
m
AintenAnce
option
by pressing number <4> on the keypad.
2. From the P
ASSworD
m
AintenAnce
, select the r
emoVe
U
Ser
option by
pressing number <5> on the keypad.
D
eScriPtion
:
The r
emoVe
U
Ser
function allows removing an existing user from the sys-
tem. To remove an existing user:
1. Select <1> on the keypad. Toggle through the 2-digit ID codes for the
user you want to remove from the system.
2. Select <2> on the keypad. You will be prompted to confirm the remove
operation.
*note*
This function is only available to personnel with
Master password access to Vendor Diagnostics.