Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual User Manual
Page 29
25
R
epleniShing
c
aSSetteS
2. The reject cassette is now open for collecting any rejected bundle notes.
These will be present in the folding tray. After retrieving any rejected
bundle notes, lift the folding tray and check underneath for any rejected
single notes (refer to the figures below).
3. After removing any rejected notes, close the lid. Fold the lid down to its
locked position. The release button should “pop” out, allowing the lid to
mate cleanly with the body of the cassette. Turn the key counterclockwise
to lock the cassette.
i
nStalling
the
R
eJect
c
aSSette
Using the reverse of the steps taken to remove the reject cassette, slide the
cassette back into its slot in the mechanism. Make sure the cassette is fully
inserted. Once all cassettes are ready, lock them into position by pressing the
c
ancel
key from the Prism
TM
NDC Supervisor a
dd
c
aSh
screen (Refer to
“Replenishing Cassettes”).
Bundle reject tray.
. Single reject compartment.