Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual User Manual
Page 67
Advertising
t
riton
D
iAgnoSticS
63
The default factory user ID is 00 and the default password is 1234.
A
cceSS
i
nStrUctionS
:
1. From the Supervisor “S
elect
” menu, select “D
iAgnoSticS
” by pressing
the number <7> on the keyboard, followed by the <Enter> key.
2. From the Supervisor “D
iAgnoSticS
” menu , select “V
enDor
D
iAgnoS
-
ticS
” by pressing the number <12> on the keyboard, followed by the
<Enter> key. This will launch the Triton Diagnostics application (Run-
ning Triton Diagnostics) via an embedded XFS Vendor Dependent Mode
(VDM) service provider. After the Prism Services have successfully ini-
tialized, the Security Login (Management Functions) should appear on
the display.
(TRITON) VENDOR DIAGNOSTICS
Advertising
This manual is related to the following products: