Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 26)

22
M
odel
Rl/Ft5000 Xp U
SeR
M
anUal w
/p
RiSM
tM ndc e
MUlation
l
oading
n
ote
c
aSSetteS
1. Load the cassette with currency. The shape of some notes may be affected
by conditions of storage or bundling, preventing them from forming neat
even piles. If not corrected, such conditions may cause notes to be rejected
by the dispensing mechanism. To compensate for the most common condi-
tions of slanting or cupped note piles, follow the directions given here.
Notes with no apparent shape problems are referred to as “common” notes.
• Slanting pile
To avoid dispensing problems caused
by a “slanting” pile, put the notes in
neat bundles of no more than ½ to ¾
inches in thickness. Turn every other
bundle around to minimize slanting of
the pile (refer to figure at right).
• Cupped bundle
To avoid dispensing problems caused
by cupped bundles, turn all the bundles
with the cupped side towards the dis-
pense opening (refer to figure at right).
• Common notes
Place the prepared bundles in the
cassette.
Slanted piles.
Cupped piles.
Leveling note pile.
2. Level the note pile. Compress the
note pile slightly by hand. Single
notes must not protrude from the
bundle (refer to figure at right).