Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 55)

51
P
riSm
tm nDc e
mUlAtion
S
UPerViSor
F
UnctionS
0 = Use Receipt Printer when printing from the front and Journal
Printer when printing from the rear (default).
1 = Use Receipt Printer when printing from the front and Receipt
Printer when printing from the rear.
2 = Use Journal Printer when printing from the front and Journal
Printer when printing from the rear.
3 = Use both printers when printing from the front and the rear.
4 = Use Journal Printer when printing from the front and Receipt
Printer when printing from the rear.
SET CASH: Prompts for the fixed amount values added to each Cassette
Type during the “STD CASH” function.
RST MODE: Prompts for the restart mode. Valid values are:
0 = DEFAULT: Power fail message is sent to host, COMM and
MAC keys revert to the B KEY* (see Access functions) (default).
1 = DIEBOLD: Power fail message is sent to host, COMM and MAC
keys revert to the B KEY*, config ID is reset.
2 = NCR: Power fail message is sent to host, COMM and MAC
keys maintain their values.
3 = AUTO: No Power fail message is sent to host, COMM and MAC
keys maintain their values.
* If MACing is used and the RST MODE is set to “0” or “1”, it
may be necessary for the Host to renew the MAC Key.
SET EJ: Enables the Electronic Journal. .
Pressing <c
Ancel
> will display the main (top-level) Select menu again.
Pressing <99> will display (
MORE
) Configure functions (sub-menu options)