Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 40)

36
M
odel
rl/Ft5000 XP U
Ser
M
anUal w
/P
riSM
tM ndc e
MUlation
3. Before inserting the new ink
cartridge, turn the cartridge knob
“counterclockwise” until ribbon
is taut (see figure at right).
4. Open the Bail. Carefully mount
the ink cartridge onto the drive
shaft, keeping the ribbon between
the Platen and the Print Head
(see the figure below).
Turn knob counterclockwise.
Knob
Ribbon
Bail
(Open position)
Ink cartridge
Guide slot
Platen
Printhead
Cartridge knob
5. Thread the ribbon through the Guide slot and, before closing the Bail, make
sure the ribbon is still taut by turning the cartridge knob counterclockwise
(see the figure below).
6. Close the Bail. The ink cartridge is now loaded.
Ink cartridge installed.