Ndc e – Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual User Manual
Page 51
47
P
riSm
tm
nDc e
mUlAtion
S
UPerViSor
F
UnctionS
INIT RECPT: Resets the receipt printer and ejects a blank receipt. If an
initialization file is specified in the NDC configuration (see NDC Configurator,
Printer section), the file contents will be sent to the printer before the eject.
TEST CASH: Tests the dispenser shutter and then picks one note from each
physical cassette and puts it in the reject bin. If the Cash Dispenser Service
Provider does not support the physical dispense, one note from each logical
cassette (or denomination) will be picked and put into the reject bin. Correctly
functioning cassettes will be listed when the function completes.
STD CASH: This function is a combination of the “CLEAR CASH”,
“ADD CASH” and “TEST CASH” functions. The amount of notes added
to each cassette type by the “ADD CASH” component is configured with the
“CONFIGURE – SET CASH” function.
INIT CHQ: Resets the Cheque Printer and prints a test cheque.
Pressing <c
Ancel
> will display the main (top-level) Select menu again.
Pressing <99> will display (
MORE
) Configure functions (sub-menu options)