Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 86)

82
m
oDel
rl/Ft5000 XP U
Ser
m
AnUAl w
/P
riSm
tm nDc e
mUlAtion
t
eSt
k
eyPAD
A
cceSS
i
nStrUctionS
:
1. From the D
iAgnoSticS Screen
, select the k
eyPAD
option by pressing
number <2> on the keypad.
2. From the k
eyPAD
screen, select the t
eSt
k
eyPAD
option by pressing
number <2> on the keypad.
The t
eSt
k
eyPAD
function enables you to verify proper operation of the nu-
meric, function, and control buttons of the terminal. Press any button (except
the <Cancel> button) and the report dialog will indicate (echo) the state of
the button (e.g. Keypad (1) pressed). When done testing all the keys, press
<Cancel> to exit and return to the Keypad menu.
*note*
Buttons pressed at the EPP keypad will be referred to as
a “Keypad” button. If one of the 8 screen function keys
on the front side of the control panel is pressed, it will be
referred to as a “Screen button”.