Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 52)

48
m
oDel
rl/Ft5000 XP U
Ser
m
AnUAl w
/P
riSm
tm nDc e
mUlAtion
Pressing 99 will display additional Replenish functions on the following menu:
INIT EJ: Makes a backup of the Electronic Journal file on the hard disk,
copies the file to the “default drive” and then clears the Electronic Journal
file. Use the NDC Configurator Tool to set up the “default drive”. The floppy
drive will be used as default.
FILL ENV: Will test the envelope supply by dispensing an envelope and
then retracting it if not taken.
FILL CAMERA: Resets the camera device – currently not supported.
INIT DEPOS: Resets the Envelope Depository device.
CLR BINS: Resets the Cheque Processing Module depository pocket and
bin counters.
CHECK CDM: Clears the device status for each of the coin dispensers.
DUMP IMAGES: Copies the stored cheque images to the “default media”.
RCOPY EJ: Copies the backup copy of then electronic Journal file to the
“default drive”. See INIT EJ for configuration of “default drive”.
CLR BNA: Clears all the Cash Deposit counters.
INIT BNA: Resets the Cash Deposit device moving any media found in the
transport or presenter to one of the deposit cassettes.
Pressing <c
Ancel
> will display the main (top-level) Select menu again.
Pressing <99> on the (
MORE
) Replenish sub-menu page will display the main
(top-level) Replenish menu again.
3.2.1 (
MORE
) Replenish functions (sub-menu options)