Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual User Manual
Page 25
Advertising
21
R
epleniShing
c
aSSetteS
o
pening
n
ote
c
aSSetteS
1. Insert the key into the cassette lock (refer to figure below left). To unlock
the cassette, apply inward pressure on the key while turning it clockwise
to the stop position (approximately a quarter-turn). Open the cassette by
simultaneously pressing the release button and lifting the lid. Flip the lid
back fully, allowing it to rest on the table or other flat surface (refer to
figure below right).
Key inserted.
Release button.
2. Move the pusher plate to the rear of the cassette (toward the handle).
Ensure the pusher plate is fully back. It should stay in this position (refer
to figure below).
Open lid and move pusher
plate back.
Advertising
This manual is related to the following products: