Responses to multi-line message commands – GW Instek PSB-2000 Series User Manual User Manual
Page 141
EXTERNAL CONTROL
141
Responses to Multi-Line Message Commands
Introduction
The table below shows the types of multi-line
message commands and the responses to the
commands.
Type
Name
Description
Response
Universal
commands
DCL Clears the GP-IB buffer.
O
SPE Establishes the serial polling state.
O
SPD Clears serial polling.
O
PPU Clears parallel polling.
×
LLO
Brings all devices into the local lockout status
to disable manual operation.
O
Address
commands
UNL Cancels the specified listener status.
O
UNT Cancels the specified talker status.
O
SDC Clears the GPIB buffer.
O
PPC
Enables parallel polling line assignment to the
specified listener in parallel polling.
×
GTL Brings a specified device into the local status.
O
GET Triggers a specified device.
×
TCT Transfers the controller.
Ч