GW Instek PSB-2000 Series User Manual - Manual (Page 58)

PSB-2000 Series User Manual
58
Off Timer Function
Menu Item: 04(PSB-L Series), 03(PSB-H Series)
Introduction This function turns the output off automatically after
a set amount of time. The timer can be set in ten
minute steps to a maximum of 99 hours, 50 minutes.
Procedure 1. Press the MENU key until menu number ―04‖ is
displayed(PSB-L) or ―03(PSB-H series)
2. Press the ENTER / CHECK key to enter the Off
Timer settings.
3. Select ON or OFF with the encoder wheel. The
Off Timer is turned off by default.
Initial setting OFF timer activated
4. Press the ENTER / CHECK key to confirm the
setting.
The OFF TIMER LED in the center of the panel
will turn on when the timer is active.
●
OFF TIMER
○ DELAY
○ Hi-Ω
5. Next, set the timer time with the encoder
wheel.
Press the ENTER /
CHECK key to confirm the
setting.