GW Instek PSB-2000 Series User Manual - Manual (Page 46)

PSB-2000 Series User Manual
46
How to Display the Setting Value When the Output is On
Output methods The power supply unit displays the output value
when the output is on. Press the ENTER/
CHECK
key when the output is on to switch the display to
the setting value.
Procedure Every press of the ENTER/ CHECK key toggles the
display between the setting mode and output
mode.
When the output is on and the mode has been
switched to the setting mode, the A or V key
blinks, indicating that the setting value is being
displayed.
Note  The setting value is changed if the encoder wheel
is rotated in the setting mode. The output value is
changed if the encoder is rotated in the output
mode. Do not touch the encoder to check the
setting values.
→ →
Output value
Press CHECK:
Set value
Press CHECK:
Output value