GW Instek PSB-2000 Series User Manual - Manual (Page 68)

PSB-2000 Series User Manual
68
3. Press the ENTER / CHECK key to confirm the
setting.
The DELAY LED in the center of the panel turns
on.
○
OFF TIMER
● DELAY
○ Hi-Ω
4. Set the rise delay time with the encoder wheel.
When a positive time is set, the output of channel
2 is delayed with respect to channel 1. On the
contrary, when a negative time is set, the output
of channel 2 leads that of channel 1. The delay
time can be set in the range of -9.99 seconds to
+10.00 seconds in steps 10 ms.
The output of channel 2 is
turned on 9.99 seconds
earlier The output of channel 2 is
turned on 10.00 seconds
later.
5. Set the fall delay time with the encoder wheel, and
press the ENTER / CHECK key. The delay function
setting is now complete.
The channel 2 output is
turned off 9.99 seconds
earlier The channel 2 output is
turned off 10.00 seconds
later.
6. Press the ESC / DISP key to quit the delay settings
and return to normal operation.