GW Instek PSB-2000 Series User Manual - Manual (Page 69)

OPERATION
69
Tracking Function
Menu Item: 09 (PSB-L2)
Introduction The tracking function is available on the dual
channel model (PSB-2400L2) only. When the
tracking function is turned on, the output of
channel 2 is made to match the output of channel
1, thus channel 2 can be said to ―track‖ channel 1.
This effectively means that the values of both
channels change simultaneously.
Fig. Tracking
Operation
Channel 1
Channel 2
5V
10V
20V
20V
5V
5V
Tracking function
ON
Changing set values
with encoder or through
communication
Procedure 1. Press the MENU key until the menu number
―09‖ is displayed.
2. Press the ENTER / CHECK key to enter the
tracking function setting mode. Select On or
Off with the encoder wheel. By default the
tracking function is turned off.
3. Press the ENTER / CHECK key to confirm the
setting.
Both the CH1 and CH2 LEDs on the right of the
channel LED turn on.
4. Press the ESC / DISP key to quit the setting