GW Instek PSB-2000 Series User Manual - Manual (Page 52)

PSB-2000 Series User Manual
52
Preset Function
Menu Item: 01(All Models)
Introduction This function saves settings to one of the three
PRESET keys. The settings shown below may be
preset. Note that any other settings/values may
not be saved.
 Set voltage
 Set current
 Set power
Procedure 1. Set the voltage/current/power settings that
you want saved.
2. Press the MENU key until menu number ―01‖ is
displayed.
3. Press the ENTER/ CHECK key. All the PRESET
keys blink green.
4. Press the PRESET key that you want to assign
the current settings to. The PRESET key that
you press will be lit a solid green to indicate
that the save was successful.
5. Press the ESC/ DISP key to return to normal
operation.
CAUTION Once the MENU key is pressed to activate the preset
function, you can no longer set the voltage, current
and power. Set the intended values before