HT instruments SPEED418 - Manual (Page 63)

400 Series
EN - 62
10. CONNECTING THE INSTRUMENT TO A PC
The instrument can be connected to a PC via a serial port or USB and an optoisolated
cable. Before connecting, it is necessary to select the port to be used and the right baud
rate (9600 bps) on the PC. To set these parameters, start the software and refer to the
program's on-line help. The selected port must not be engaged by other devices or
applications, e.g. a mouse, a modem, etc. To transfer the saved data to the PC, follow this
procedure
1. Switch on the instrument by pressing the ON key
2. Connect the instrument to the PC via the optoisolated cable
3.
Press the MENU key, move the cursor to MEM (the communication is
enabled only for MEM) in the main menu by means of the arrow keys ,
and confirm with ENTER
4. Use the data management software for transferring the content of the instrument
memory to the PC
5. During data transfer, the instrument displays the MEM screen. Press any key to stop
the data transfer