Agilent Technologies Agilent B2201A - Manual (Page 104)

4-4 Agilent B2200 User’s Guide, Edition 4
Programming
Programming Basics
Fundamental Commands
The following commands are used to set the fundamental switch control functions
of the Agilent B2200. The commands should be entered before performing the
open/close operation. For the functions, see “Switch Control Functions” on page
3-12.
Table 4-1 Fundamental Commands
Functions Commands
Sets the channel configuration
mode. :ROUT:FUNC NCON
:ROUT:FUNC ACON
Sets the connection rule. :ROUT:CONN:RULE card_no,FREE
:ROUT:CONN:RULE card_no,SROU
Sets the connection sequence. :ROUT:CONN:SEQ card_no,NSEQ
:ROUT:CONN:SEQ card_no,BBM
:ROUT:CONN:SEQ card_no,MBBR