Agilent Technologies Agilent B2201A - Manual (Page 58)

2-22 Agilent B2200 User’s Guide, Edition 4
Installation
Input Connections
In the table above,
• CMH/CML connectors are a pair of the AUX inputs.
• The Agilent B2200 does not have the interlock connector. Connect directly from
instrument to the connector plate which has an interlock connector.
• The Agilent 41422A/41423A (HCU/HVU) of the Agilent 4142B cannot be used
with the Agilent B2200.
• To connect instrument output that uses banana plug to the AUX connector, use
the dual banana plug to BNC adapter (Agilent part number 1251-2277).
DC
Measurement E5260/
E5270 SMU SMU1 to 8 16493K Kelvin triaxial cable or
16494A triaxial cable
GNDU SMU1 to 8 16493N GNDU Kelvin cable
− 16493H GNDU cable
(for direct connection to connector plate)
Interlock − 16493J interlock cable
(for direct connection to connector plate)
C
Measurement C Meter High, Low CMH/CML 16494F CMU cable for 4 terminal pairs
Pulse Input Pulse
Generator Output AUX1 to 6 BNC cable
Bias Input Power
Supply Output AUX1 to 6 BNC cable
Application
Instrument
B2200
Input
Connector
Cable Required
Agilent
Model No.
Output
Connector